WalkLAB Professional pH meter HP9010
The meter uses a regular BNC connector and accepts a variety of other electrodes for special measurement needs. The meter comes complete in a hard carrying case with calibration buffer solutions.
Large LCD with Multiple Display
Display of pH, temperature and time simultaneously
Autolock Measurement
Meter automatically sense a stabilized endpoint reading
This ensures workers only takes in an accurate reading
all the time and every time.
Multi-point calibration
Automatic buffer recognition with built in standards:
ISO - pH7.00, 4.01, 10.01
NIST - pH6.68, 4.01, 9.18
Custom - Manual set to any buffer standard.
Up to 5 points calibration
Electrode status indicator
Able to display percentage of slope of the electrode after successive calibration. This feature enables user
to determine if the electrode should be replaced due to wear and tear.
Real Time Memory
Able to save records of up to 99 data memory with date and time, enable download to PC.
Online PC link
Able to link to a PC for online display with optional PC kit (sold separately) and download saved data.
Meter uses regular AAA size batteries and tap power source from PC when connected via the USB cable.
Specifications:
|
|
pH | mV | Temperature | |
Range |
-2 to 16 pH | ±700.0mV | ±2,000mV | 0 to 120ºC |
| Resolution | 0.01pH | 0.1mV | 1mV | 0.1ºC |
| Accuracy | ±0.02pH | ±0.5mV | ±2mV |
±0.1 ºC
±0.5ºC (Probe)
|
| Calibration | Min. 2 point, Max. 5 point | |||
| Buffer Recognition | up to 60ºC or 95ºC depending on buffer type | |||
| Automatic Temperature Compensation |
pH electrode temperature error compensation 0 to 120ºC
|
|||
| Memory | 99 data with real time clock | |||
| Power source | 4 x 1.5Volt AAA size battery | |||
| Operating temperature | 5 to 40ºC | |||
| Storage temperature | -20 to 60ºC | |||
| Operating humidity | Up to 95% RH | |||